Corrosion Testing Methodologies

Corrosion Testing Laboratories


Comprehensive Standard Test Methods for Corrosion Analysis

Over the past 40 years, Corrosion Testing Laboratories has performed research and written papers on many issues for various industries. CTL Personnel have been primary authors, co-authors, and presenters of this work with the goal of technical progress. Some of these papers and presentations are shared below.


Whether you're dealing with complex industrial challenges or seeking insights for material optimization, our expert team is ready to assist. Contact Corrosion Testing Laboratories today to discuss your specific testing requirements.

  • A90/A90M Weight of Zinc Coatings
  • A262 Practice A (Oxalic Acid Etch)
  • A262 Practice B (Streicher Test)
  • A262 Practice C (Huey Test)
  • A262 Practice E (Modified Strauss Test)
  • A380 Cleaning and Descaling Stainless Steels
  • A923 SSAT Duplex Stainless Steels
  • B858 Stress Corrosion Cracking in Copper Alloys
  • C871 Extraction of Leachable Ions
  • D2240 Rubber Property Durometer Hardness
  • D2583 Barcol Hardness
  • D4340 Pressurized Hot Wall
  • E3 Standard Metallographic Practice
  • E45 Inclusion Content
  • E112 Grain Size
  • F746 Medical Implants
  • F2129 E/C Testing of Surgical Implants
  • F3044 Galvanic Testing of Surgical Implants
  • F3306 Ion Release Evaluation of Medical Implants
  • G1 Preparation, Cleaning, Evaluating Test Specimens
  • G3 Conventions Applicable to E/C Measurements
  • G5 Potentiostatic/Potentiodynamic Anodic Polarization
  • G28 Method A (Ferric Sulfate/Sulfuric Acid)
  • G28 Method B (PEMT)
  • G31 Immersion Testing
  • G36 Boiling Magnesium Chloride
  • G37 Stress Corrosion Cracking of Copper-Zinc Alloys
  • G44 Alternate Immersion Testing
  • G47 Stress Corrosion Cracking of Aluminum
  • G48 Ferric Chloride Pitting and Crevice Tests
  • G59 Potentiodynamic Polarization Resistance
  • G61 Cyclic Potentiodynamic Polarization
  • G71 Galvanic Corrosion Tests
  • G102 Calculation of Corrosion Rates from E/C Measurements
  • G108 E/C Reactivation for Detecting Sensitization
  • G123 Boiling Sodium/Calcium/Lithium Chloride
  • G150 Critical Pitting Temperature
  • G210 Severe Wastewater Analysis Test

NACE:

  • TM0169 Standard Immersion
  • TM0174 Protective Coatings
  • TM0177 Sulfide Stress Corrosion
  • TM0284 Resistance to Hydrogen Induced Cracking (HIC)
  • TM 0187 Elastomeric Materials in Sour Gas

ISO:

  • ISO 6509 Dezincification of Brass
  • ISO 10271 Corrosion of Dental Materials
  • ISO 3651 Resistance to Intergranular Corrosion
  • ISO 7539 Stress Corrosion Testing
  • ISO 9400 Ni-Based Alloys Intergranular Corrosion

OTHER:

  • US DOT Corrosivity

 - Skin Corrosivity – Corrositex™

 - Assay Metal Test – UN Section 37

  • DuPont SW800M SSAT
  • DuPont  SW1P Ferroxyl Test

MTI

  • MTI – 1 Standard Immersion
  • MTI – 2 Ferric Chloride Crevice
  • MTI – 3 Boiling MgCl

EPA

  • Method 1110 Corrosivity Towards Steel
  • Method 9031 Extractable Sulfides